LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1083 (Automatic Transmission) >> In-Vehicle Servicing >> Transaxle Filler Tube >> Installation

Transaxle Filler Tube: Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fluid filler tube and the nut.
    • Tighten to 11 Nm (8 lb-ft).
  2. Fig 1: Identifying Transmission Fluid Filler Tube
    GF0031643Courtesy of FORD MOTOR CO.
  3. Install the transmission fluid level indicator.
  4. Fig 2: Identifying Transmission Fluid Level Indicator
    GF0031642Courtesy of FORD MOTOR CO.
  5. Route the coolant hoses in the transmission fluid filler tube.
  6. Fig 3: Identifying Coolant Hoses From Transmission Fluid Filler Tube
    GF0031641Courtesy of FORD MOTOR CO.