LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1083 (Automatic Transmission) >> In-Vehicle Servicing >> Halfshaft Seal - LH >> Installation

Halfshaft Seal - LH: Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new halfshaft seal on the special tool.
  2. Fig 1: Installing Halfshaft Seal On Special Tools (307-582) & (205-153)
    GF0031676Courtesy of FORD MOTOR CO.
  3. Using the special tool, install the LH halfshaft seal.
  4. Fig 2: Installing LH Halfshaft Seal Using Special Tools (307-582) & (205-153)
    GF0031680Courtesy of FORD MOTOR CO.
  5. Install the front LH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS .
  6. Fill with clean transmission fluid to the correct level.