Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Remove the climate control module. For additional information, refer to Climate Control Module - Edge .
Pull to remove the blower motor switch knob.
Remove the blower motor switch nut.

Fig 1: Identifying Blower Motor Switch Knob

Courtesy of FORD MOTOR CO.

Release the 2 retaining tabs with the index finger on each hand, while depressing the blower motor switch shaft with the thumbs to remove the blower motor switch.

Fig 2: Identifying Blower Motor Switch Shaft

Courtesy of FORD MOTOR CO.

To install, reverse the removal procedure.