LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1080 (Engine) >> In-Vehicle Servicing >> Oil Cooler >> Installation

Oil Cooler: Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using new gaskets, install the oil cooler and the 6 bolts.
    • Tighten to 10 Nm (89 lb-in).
  2. Connect the 2 coolant hoses to the oil cooler.
  3. Install the LH catalytic converter. For additional information, refer to EXHAUST SYSTEM .
  4. Fill and bleed the cooling system. For additional information, refer to ENGINE COOLING .
scientia non olet · About LEMON Manuals