Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
Remove the accessory drive belt and the power steering belt. For additional information, refer to ACCESSORY DRIVE .
Using the special tool, remove the crankshaft bolt and washer.
- Discard the bolt.

Fig 1: Removing Crankshaft Bolt & Washer Using Special Tool (303-D055)

Courtesy of FORD MOTOR CO.

Using the special tool, remove the crankshaft pulley.

Fig 2: Removing Crankshaft Pulley Using Special Tool (303-D121)

Courtesy of FORD MOTOR CO.