Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Apply clean engine oil to the crankshaft front seal bore in the engine front cover.

Using the special tools, install a new crankshaft front seal.

Fig 1: Installing Crankshaft Front Seal Using Special Tools (303-102) & (303-1251)

Courtesy of FORD MOTOR CO.

Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley .