LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1072 (Rear Drive Axle/Differential) >> In-Vehicle Servicing >> Stub Shaft Pilot Bearing and Seal >> Removal

Stub Shaft Pilot Bearing and Seal: Removal

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the halfshaft assembly. For additional information, refer to REAR DRIVE HALFSHAFTS .
  2. To remove the seal, use the special tool to remove the stub shaft seal. The stub shaft pilot bearing is not serviced.
    3. Fig 1: Using Special Tool (100-001) & (307-163) To Remove Stub Shaft Seal
    GF0029545Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals