LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1068 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Removal

Wheel Studs: Removal

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and wheel hub. For additional information, refer to Wheel Bearing and Wheel Hub .
  2. Using a press, remove the wheel stud from the wheel bearing and hub assembly.
  3. Fig 1: Removing Wheel Stud From Wheel Bearing & Hub Assembly Using A Press
    GF0000723Courtesy of FORD MOTOR CO.