LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1068 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Installation

Wheel Studs: Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new wheel stud in the wheel hub, aligning the serrations in the wheel hub flange made by the original wheel stud.
  2. Using a press, install a new wheel stud.
    3. Fig 1: Installing New Wheel Stud Using A Press
    GF0000724Courtesy of FORD MOTOR CO.
  3. Install the wheel bearing and wheel hub. For additional information, refer to Wheel Bearing and Wheel Hub .
scientia non olet · About LEMON Manuals