Wheel Bearing and Wheel Hub: Installation

WARNING: This page is about a different car, the 2007 Lincoln MKX and 2007 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Using the special tool, press the wheel bearing into the wheel knuckle.

Fig 1: Pressing Wheel Bearing Into Wheel Knuckle Using Special Tool (205-147)

Courtesy of FORD MOTOR CO.

Install the snap ring.
Using the special tools, press the wheel hub into the wheel bearing.

Fig 2: Pressing Wheel Hub Into Wheel Bearing Using Special Tools (205-117) & (205-147)

Courtesy of FORD MOTOR CO.

Install the wheel knuckle. For additional information, refer to Wheel Knuckle .