LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1029 (Automatic Transmission External Controls - (Hybrid)) >> Removal And Installation >> Selector Lever Button >> Installation

Selector Lever Button: Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new selector lever button by pressing the button into the selector lever until it clicks into place.
  2. Fig 1: Selector Lever Button
    GF0025284Courtesy of FORD MOTOR CO.