LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Full Frame And Body Mounting -- F250-F550 Super Duty) >> Description And Operation >> Frame and Body Mounting

Frame and Body Mounting

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The frame is made up of steel channel two-piece rails and riveted crossmembers, except for the transmission support crossmember which is bolted. The vehicle body sits on rubber body supports. There are lower and upper body supports to keep the vehicle body from sitting directly on the frame.

Frame Assembly 

NOTE: The Crew Cab frame assembly is shown, the regular and SuperCab frame assemblies are similar.
Fig 1: Identifying Crew Cab Frame Assembly
G03926301Courtesy of FORD MOTOR CO.

Body Mounts - Crew Cab 

NOTE: The Crew Cab body mount locations are shown, the regular and SuperCab body mount locations are similar.
Fig 2: Identifying Crew Cab Body Mount Locations
G03926302Courtesy of FORD MOTOR CO.