DTC P1517: - Intake Manifold Runner Control (IMRC) Input Error (Bank 2)
DTC P1517: - INTAKE MANIFOLD RUNNER CONTROL (IMRC) INPUT ERROR (BANK 2)
| Description: | The IMRC system is monitored for failure during continuous or key on engine off (KOEO) self-test. Each DTC distinguishes the corresponding bank for IMRC actuator assemblies with dual monitor switches. The test fails when the signal is outside an expected calibrated range. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IMRC and IMRCM PIDs. The IMRCM state should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HU . | - | GO to Pinpoint Test HU . |