DTC P1513: - Intake Manifold Runner Control (IMRC) Stuck Closed (Bank 2)

DTC P1513: - INTAKE MANIFOLD RUNNER CONTROL (IMRC) STUCK CLOSED (BANK 2)

Description:	This DTC is set when the vacuum actuated IMRC is commanded open, but the IMRC monitor indicates closed.
Possible Causes:	IMRC monitor circuit open Suspect IMRC solenoid Mechanical concern - bind, seize, damage, or obstruction of IMRC hardware
Diagnostic Aids:	Monitor the IMRC and IMRCM PIDs. The IMRCM state should change when the IMRC is commanded open or closed.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	-	-	GO to Pinpoint Test HU .