DTC P0528: - Fan Speed Sensor Circuit No Signal
DTC P0528: - FAN SPEED SENSOR CIRCUIT NO SIGNAL
| Description: | The powertrain control module (PCM) uses the fan speed sensor (FSS) input to monitor the cooling fan clutch speed. If the indicated fan speed is lower than the calibrated value during the key on engine running (KOER) self-test, the DTC is set. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Visually inspect the cooling fan clutch for damage or obstruction. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HV . | ||