DTC P0461: - Fuel Level Sensor A Circuit Range/Performance
DTC P0461: - FUEL LEVEL SENSOR A CIRCUIT RANGE/PERFORMANCE
| Description: | The powertrain control module (PCM) monitors the fuel level input (FLI) communications network message for a concern. The test fails when the FLI signal repeatedly moves in and out of range, exceeding the minimum or maximum allowable calibrated parameters for a specified fuel fill percentage in the fuel tank. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify aftermarket equipment does not generate the radio frequency interference / electromagnetic interference (RFI/EMI) which may cause noisy FLI input signal. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HX . | ||