DTC P0127: - Intake Air Temperature (IAT) Too High

DTC P0127: - INTAKE AIR TEMPERATURE (IAT) TOO HIGH

Description:	Indicates that the IAT2 sensor has detected a concern in the charge air cooler (CAC) system.
Possible Causes:	Blockage of heat exchangers Low fluid level Fluid leakage CAC pump or relay failure Crossed CAC coolant lines
Diagnostic Aids:	Monitor the IAT2 PID. A typical IAT2 temperature should be greater than the IAT1 temperature.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test DU .