DTC P0113: - Intake Air Temperature (IAT) Sensor 1 Circuit High
DTC P0113: - INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT HIGH
| Description: | Indicates the sensor signal is greater than the self-test maximum. The IAT sensor maximum is 4.6 volts or -50°C (-58°F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An IAT PID reading greater than 4.6 volts with the ignition ON engine OFF or during any engine operating mode indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DA . | ||