LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control >> Removal And Installation >> Variable Camshaft Timing (VCT) Oil Control Solenoid >> Removal and Installation

Removal and Installation

  1. Remove the LH or RH valve cover. For additional information, refer to ENGINE - 3.5L .
  2. Remove the bolt and the Variable Camshaft Timing (VCT) oil control solenoid.
    • To install, tighten to 10 Nm (89 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals