LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Cylinder Bore Out-of-Round

Cylinder Bore Out-of-Round

NOTE: Refer to the appropriate ENGINE - 3.5L for the specification.
  1. Measure the cylinder bore in 2 directions. The difference is the out-of-round.
    Fig 1: Checking Cylinder Bore Out-Of-Round
    G06064070Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals