LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Crankshaft Main Bearing Journal Taper and Out-of-Round

Crankshaft Main Bearing Journal Taper and Out-of-Round

NOTE: Refer to the appropriate ENGINE - 3.5L for the specification.
  1. Measure each of the crankshaft main bearing journal diameters in at least 2 directions at each end of the main bearing journal.
    Fig 1: Identifying Crankshaft Main Bearing Journal Diameters
    G06064061Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals