LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Crankshaft End Play >> Special Tool(s)

Special Tool(s)

SPECIAL TOOL CHART

G06064974Courtesy of FORD MOTOR CO.
 Dial Indicator Gauge with Holding Fixture
100-002 (TOOL-4201-C) or equivalent
NOTE: Refer to the appropriate ENGINE - 3.5L for the specification.
  1. Install the Dial Indicator Gauge with Holding Fixture.
  2. Position the crankshaft to the rear of the cylinder block.
  3. Zero the Dial Indicator Gauge.
  4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
    Fig 1: Checking Crankshaft End Play
    G06064065Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals