LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod-to-Piston Clearance >> Special Tool(s)

Special Tool(s)

SPECIAL TOOL CHART

G06064067Courtesy of FORD MOTOR CO.
 Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent
NOTE: Refer to the appropriate ENGINE - 3.5L for the specification.
  1. Using the Feeler Gauge Set, measure the clearance between the connecting rod and the piston. Verify the measurement is within specification.
    Fig 1: Measuring Clearance Between Connecting Rod And Piston
    G06064068Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals