Special Tool(s)

SPECIAL TOOL CHART

Courtesy of FORD MOTOR CO.

Dial Indicator Gauge with Holding Fixture
100-002 (TOOL-4201-C) or equivalent

NOTE: Refer to the appropriate ENGINE - 3.5L for the specification.

NOTE: Camshaft journals must be within specifications before checking runout.

Using the Dial Indicator Gauge with Holding Fixture, measure the camshaft runout.
- Rotate the camshaft and subtract the lowest Dial Indicator Gauge reading from the highest Dial Indicator Gauge reading.
  
  Fig 1: Measuring Camshaft Runout
  Courtesy of FORD MOTOR CO.