Pinpoint Test A: Battery Condition Test

A1 TEST THE BATTERY CONDITION
NOTE: A red test-eye indicates the battery is discharged, not necessarily defective.

NOTE: Failure to fully charge the battery before retesting may cause false readings.
- Verify the battery condition using the Micro 490 Digital Battery Analyzer.
- Is the battery OK?
- Yes : If the meter reads GOOD BATTERY, RETURN the battery to service.
  If the meter reads GOOD-RECHARGE, CHARGE the battery and RETURN it to service.
  
  If the meter reads CHARGE & RETEST, fully CHARGE and RETEST the battery.
- No : If the meter reads REPLACE BATTERY, INSTALL a new battery.
  If the meter reads BAD CELL-REPLACE, INSTALL a new battery.