Removal and Installation

With a non-marring tool, gently pry the refrigerator switch bezel slightly outward to access the 3 retaining tabs on the refrigerator switch bezel.
Using a small flat blade screwdriver, gently press the 3 refrigerator switch bezel retaining tabs inward at the locations shown in illustration, while pulling the refrigerator switch bezel outward.

Fig 1: Locating Refrigerator Switch Bezel Retaining Tabs
Courtesy of FORD MOTOR CO.
Remove the refrigerator switch and bezel.
- Disconnect the electrical connector.
Separate the refrigerator switch from the refrigerator switch bezel.
To install, reverse the removal procedure.