LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, & Warning Chimes >> Removal And Installation >> Instrument Cluster (IC) >> Removal

Instrument Cluster (IC): Removal

  1. If installing a new Instrument Cluster (IC), upload the module configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION .
  2. Remove the IC  finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  3. Lower the steering column to the lowest position.
  4. Remove the 4 screws and the IC  .
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals