Service Roll Stability Control (RSC®) Warning Chime

The service RSC®  warning chime warns that the ABS module detects a fault condition in the RSC®  system. The SERVICE RSC message is also displayed along with the chime.

The service RSC®  chime sounds for 6 seconds and then stops sounding for 5 minutes then repeats the sequence. The RSC®  chime stops sounding when the ignition lock cylinder is turned from the RUN/START position to the OFF/LOCK or ACC position or when fault condition is repaired.

The service RSC®  warning chime inputs are:

• Ignition switch RUN/START status.
• Service RSC®  chime request communicated by the ABS module to the IC  through the HS-CAN  .