Headlamps On Warning Chime

The headlamps on warning chime warns that the headlamps are on when the driver door is ajar and the key is removed from the ignition lock cylinder. The headlamps on warning chime sounds if the driver door is ajar, the headlamp switch is in the PARK or HEADLAMP position, and the key is removed.

The headlamps on warning chime stops sounding when any one of the above conditions are removed.

The headlamps on warning chime inputs are:

• Ignition switch position to the SJB  .
• Key-in-ignition switch position to the SJB  .
• Door ajar input from the driver door ajar switch to the SJB  .
• Headlamp switch input to the SJB  .
• Headlamps on chime request communicated by the SJB  to the IC  through the MS-CAN  .

Key-In-Ignition Warning Chime 

The key-in-ignition warning chime warns that the key is still in the ignition lock cylinder when the driver door is ajar. The key-in ignition warning chime sounds when the driver door is ajar, the key is in the ignition lock cylinder and in the OFF/LOCK or ACC position.

The key-in-ignition warning chime stops sounding when the driver door is closed, the key is removed from the ignition lock cylinder, or if the ignition switch is turned to the ON position.

The key-in-ignition warning chime inputs are:

• Ignition switch RUN/START status.
• Key-in-ignition switch position to the SJB  .
• Door ajar input from the driver door ajar switch to the SJB  .
• Key-in-ignition chime request communicated by the SJB  to the IC  through the MS-CAN  .