LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, & Warning Chimes >> DIAGNOSIS and TESTING >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test AH: The Turn Signal On Warning Chime Is Inoperative >> Pinpoint Test Ah: The Turn Signal On Warning Chime Is Inoperative

Pinpoint Test Ah: The Turn Signal On Warning Chime Is Inoperative

  1. AH1 CARRY OUT THE CHIME FUNCTION ACTIVE COMMAND 
    • Ignition ON.
    • Enter the following diagnostic mode on the scan tool: IC  DataLogger.
    • Select the IC  chime command (CHIME_TS_ON).
    • Does the chime operate? 
    • Yes  : GO to AH2.
    • No  : INSTALL a new IC  . REFER to INSTRUMENT CLUSTER (IC) . TEST the system for normal operation.
  2. AH2 CHECK THE TURN SIGNAL INDICATORS OPERATION 
    • Ignition ON.
    • Verify the turn signal indicators operation.
    • Do the turn signal indicators operate correctly? 
  3. AH3 CHECK THE ODOMETER FOR CORRECT OPERATION 
    • Verify that the vehicle odometer operates.
    • Does the odometer operate correctly? 
scientia non olet · About LEMON Manuals