LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake System - General Information >> Diagnosis And Testing >> Component Tests >> Brake Master Cylinder - Bypass Condition

Brake Master Cylinder - Bypass Condition

  1. Inspect the master cylinder. For additional information, refer to BRAKE SYSTEM INSPECTION .
  2. Disconnect the brake tubes from the master cylinder.
  3. Plug the outlet ports of the master cylinder.
    4. NOTE: Make sure that the outlet port plugs do not show signs of leakage.
  4. Lightly apply the brakes and hold for 10 seconds. Release the brakes and then reapply with heavy force. If brake pedal height cannot be maintained, the brake master cylinder has an internal leak and a new brake master cylinder must be installed.
scientia non olet · About LEMON Manuals