LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Steering Wheel Rotation Sensor >> Removal and Installation

Removal and Installation

  1. Remove the steering column shrouds. For additional information, refer to STEERING COLUMN .
  2. Disconnect the steering wheel rotation sensor electrical connector.
  3. Remove the 2 bolts and the steering wheel rotation sensor.
  4. To install, reverse the removal procedure.
    • Drive the vehicle and make several tight circles to calibrate the new sensor.
scientia non olet · About LEMON Manuals