LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System >> Removal And Installation >> Rear Disc Brake Shield >> Removal and Installation

Removal and Installation

  1. Remove the wheel hub and bearing. For additional information, refer to REAR SUSPENSION .
  2. Remove the 3 bolts and the brake disc shield.
    • To install, tighten to 15 Nm (133 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals