LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Front Disc Brake System >> Removal And Installation >> Brake Disc Shield >> Removal and Installation

Removal and Installation

  1. Remove the brake disc. For additional information, refer to BRAKE DISC .
  2. Remove the 3 bolts and the brake disc shield.
    • To install, tighten to 15 Nm (133 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals