LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Front Disc Brake System >> Removal And Installation >> Brake Caliper >> Installation

Brake Caliper: Installation

  1. Position the brake hose and install the brake caliper flow bolt.
    • Install new copper washers.
    • Tighten to 47 Nm (35 lb-ft).
  2. Install the brake pads. For additional information, refer to BRAKE PADS .
  3. Bleed the brake caliper. For additional information, refer to BRAKE SYSTEM - GENERAL INFORMATION for Component Bleeding.
scientia non olet · About LEMON Manuals