LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Front Disc Brake System >> Removal And Installation >> Brake Caliper Anchor Plate >> Installation

Brake Caliper Anchor Plate: Installation

  1. Position the brake caliper anchor plate on the wheel knuckle and install 2 new bolts.
    • Tighten to 150 Nm (111 lb-ft).
  2. Install the brake pads. For additional information, refer to BRAKE PADS .
scientia non olet · About LEMON Manuals