Window Glass - Rear: Removal

Remove the rear window wiper motor. For additional information, refer to WIPERS AND WASHERS .
Remove the liftgate window moulding. For additional information, refer to EXTERIOR TRIM AND ORNAMENTATION .
Disconnect the 2 rear window defrost electrical connectors.
WARNING: Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this instruction may result in serious personal injury.

NOTE: To avoid rust formation, use extreme care not to scratch the paint or primer, or otherwise damage the pinch weld during glass removal.

NOTE: Removing the rear glass requires more than one technician.

NOTE: Lubricate the existing urethane adhesive with water to aid the Deluxe Windshield Removal Tool while cutting.

Using the Deluxe Windshield Removal Tool, place the flat side of the knife against the rear window glass window. Start cutting the glass at the top and work toward the corners.

Fig 1: Identifying Deluxe Windshield Removal Tool
Courtesy of FORD MOTOR CO.
Using The Pumper, distance the rear window glass from the body.

Fig 2: Identifying Pumper
Courtesy of FORD MOTOR CO.
Using the Deluxe Windshield Removal Tool, cut the remaining urethane adhesive and remove the window glass.