Delayed Accessory Power

The SJB  controls power to the power windows, the audio system and the power roof opening panel with the accessory delay relay. The SJB  activates the accessory delay relay whenever the ignition switch is in the RUN or the ACCESSORY position, or when the ignition switch is changed from RUN or ACCESSORY to the OFF/LOCK position and the LH and RH front doors are closed.

The SJB  will deactivate the accessory delay feature when:

• the LF door is ajar and the ignition switch is in the OFF/LOCK or KEY-OUT position.
• the RF door is ajar and the ignition switch is in the OFF/LOCK or KEY-OUT position.
• ten minutes have elapsed since the ignition switch was changed from ACC or RUN to the OFF/LOCK position.

Feature inputs: 

• LF door ajar switch (open circuit with door closed, grounded with door ajar)
• RF door ajar switch (open circuit with door closed, grounded with door ajar)
• Ignition switch RUN position (battery potential on both the RUN and RUN/ACC inputs)
• Ignition switch ACC position (battery potential on the RUN/ACC input)
• Ignition switch OFF/LOCK position (absence of battery potential on the RUN, RUN/ACC and START inputs)

Feature outputs: 

• Accessory delay relay (control circuit grounded when activated, open circuit when deactivated)