Pinpoint Test G: The One-Touch Up/Down Feature is Inoperative - LH Front Window Only: Notes

Refer to SYSTEM WIRING DIAGRAMS , Power Windows for schematic and connector information.

NOTE: A new power window motor will not operate in one-touch up mode until initialized. Refer to WINDOW MOTOR INITIALIZATION .

NOTE: The power window motor must be initialized whenever a new motor is installed.

NOTE: The power window motor must be de-initialized, then initialized whenever the window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run.