Normal Operation

The RH rear window control switch receives high current power through circuit CBP47 (GN/BU) whenever the accessory delay relay is active. The RH rear window control switch receives low current power through circuit CPW14 (VT/WH) whenever the window lock switch on the LH front window control switch is set to the UNLOCK position and the accessory delay relay is active. Ground is provided to the RH rear window control switch through circuit GD145 (BK/BU). When operating the RH rear window in the up direction, the RH rear window control switch supplies power to the RH rear window motor through circuit CPW24 (WH/VT) and ground through circuit CPW23 (GY).

When operating the RH rear window in the down direction, the RH rear window control switch provides power to the RH rear window motor through circuit CPW23 (GY) and ground through circuit CPW24 (WH/VT).