Pinpoint Test C: A Single Power Window is Inoperative - LH Front: Notes
Refer to SYSTEM WIRING DIAGRAMS , Power Windows for schematic and connector information.
NOTE:
A new LH front power window motor will not operate in one-touch up mode until initialized. Refer to WINDOW MOTOR INITIALIZATION .
The LH front power window motor must be initialized whenever a new motor is installed.
The LH front power window motor must be de-initialized, then initialized whenever the LH front window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run. Normal Operation
The LH front power window motor must be initialized whenever a new motor is installed.
The LH front power window motor must be de-initialized, then initialized whenever the LH front window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run. Normal Operation