Seat Cushion Heater Mat - Second Row, 40 Percent: Installation

NOTE: Always install a new cushion foam pad and new cushion heater mat together.

Install a new cushion heater mat onto a new cushion foam pad.
1. Position a cushion heater mat onto the cushion foam pad so the openings align to the wires in the cushion foam pad.
  - Tuck the cushion heater mat into the cushion foam pad trench.
2. Make sure the cushion heater mat stays in place, remove the paper strips from under the cushion heater mat and adhere to the cushion foam pad, laying it flat with no wrinkles.
3. Route the cushion heater mat wire harness and electrical connector through the cushion foam pad to the other side.
  
  Fig 1: Identifying Cushion Foam Pad And Cushion Heater Mat
  Courtesy of FORD MOTOR CO.
Install the cushion foam pad onto the cushion frame.
Connect the cushion heater mat electrical connector.
Install the cushion trim cover. For additional information, refer to SEAT CUSHION COVER - SECOND ROW, 40 PERCENT .