LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seating >> Removal And Installation >> Seat Control Switch - Second Row, Power-Fold >> Removal and Installation

Removal and Installation

    NOTE: RH side shown.
    Fig 1: Locating Second Row Seat Control Switch Bezel
    G06063555Courtesy of FORD MOTOR CO.
  1. Separate the weather strip, pull out on the second row seat control switch bezel and separate from the quarter trim panel.
  2. Disconnect the second row seat control switch, release the retainers (1 shown) and remove the third row seat control switch.
    Fig 2: Locating Seat Control Switch Retainers
    G06063556Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.