LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seating >> Removal And Installation >> Memory Set Switch >> Removal and Installation

Removal and Installation

  1. Remove the driver door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Release the 4 tabs (2 shown) and remove the memory SET switch.
    Fig 1: Locating Memory SET Switch Tabs
    G06063512Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals