LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seating >> Removal And Installation >> Heated Seat Module - Rear >> Removal and Installation

Removal and Installation

  1. Remove the front floor console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the heated seat module.
    1. Remove the screw.
    2. Slide away and unhook the heated seat module.
    3. Disconnect the heated seat module electrical connectors.
      Fig 1: Removing Heated Seat Module
      G06063553Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals