Disassembly and Assembly
NOTE:
LH shown, RH similar.
ITEM DESCRIPTION CHART
| Item | Part Number | Description |
|---|---|---|
| 1 | 611A08 | Head restraint assembly |
| 2 | 610A16 | Head restraint guide |
| 3 | 610A16 | Head restraint guide |
| 4 | - | Backrest frame |
| 5 | - | Pull strap |
| 6 | - | Backrest foam pad |
| 7 | 66601 | Backrest trim cover |
| 8 | - | Bushing |
- Remove the affected third row backrest. For additional information, refer to SEAT BACKREST - THIRD ROW .
- Pull up on the head restraint, push the head restraint guide button in and remove the head restraint.
- Invert the backrest trim cover and remove 2 rows of 3 hog rings.
- Release 2 tabs on each head restraint guide and remove.
- Remove the backrest trim cover.
- Pull the strap through the trim cover.
- Remove the backrest foam pad.
- Remove the bushing.
- To assemble, reverse the disassembly procedure.
NOTE:
Head restraint guide with release button goes on the LH side.