60 Percent Backrest

NOTE: Refer to steps in this procedure for inner safety belt guide and safety belt retractor bolt tightening sequence and torque specification.

Fig 1: Identifying Second Row, 60 Percent Seat Backrest

Courtesy of FORD MOTOR CO.

ITEM DESCRIPTION CHART

Item	Part Number	Description
1	611A08	LH/ RH head restraint assembly
2	501A04	LH/ RH head restraint trim cover
3	56910	Screws
4	60509	Backrest hard back panel
5	600A38	Safety belt retractor and safety belt buckle assembly
6	613A39	Backrest frame
7	610A16	LH inner/ RH outer head restraint guides
8	610A16	LH outer/ RH inner head restraint guides
9	613D10	Inner safety belt guide
10	W790115	Inner safety belt guide bolts
11	66801	Backrest foam pad
12	613B44	Pivot grommet
13	W790114	Safety belt retractor bolt
14	66601	Backrest trim cover
15	611B90	Outer safety belt trim guide

Remove the 60 percent seat from the vehicle. For additional information, refer to SEAT - SECOND ROW .
Remove the 60 percent seat backrest. For additional information, refer to SEAT BACKREST - SECOND ROW, 60 PERCENT .
Remove the LH and RH head restraints.
Squeeze the opening together and remove the outer safety belt trim guide.

NOTE: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the seat backrest foam.

Release the hook-and-loop strips, invert the backrest trim cover and remove the 2 rows of hog rings.
Release the hook-and-loop strips and invert the backrest trim cover to the top of the backrest.
Remove 5 screws and the backrest hard back panel.

NOTE: The head restraint guides are not interchangeable.

Squeeze the tabs in and remove the 4 head restraint guides.
Feed the safety belt through and remove the backrest trim cover and backrest foam pad.
Remove the safety belt retractor and safety belt buckle assembly.
- Remove 2 inner safety belt guide bolts.
- Remove the safety belt retractor bolt.