LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Handles, Locks, Latches & Entry Systems >> General Procedures >> Liftgate Release Switch >> Removal and Installation

Removal and Installation

  1. Remove the liftgate trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Disconnect the liftgate moulding electrical connector.
  3. Remove the 2 bolts and the liftgate moulding.
    • To install, tighten to 4 Nm (35 lb-in).
  4. Press the tabs and remove the liftgate release switch.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals