LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Handles, Locks, Latches & Entry Systems >> General Procedures >> Ignition Lock Cylinder - Non Functional >> Installation

Ignition Lock Cylinder - Non Functional: Installation

  1. Install a new ignition lock cylinder.
    • Verify the ignition lock cylinder operation.
  2. Install the PATS transceiver. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
  3. The new PATS  keys must be programmed. For additional information, refer to Integrated Keyhead Transmitter (IKT) Key Programming Using Diagnostic Equipment in ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .
scientia non olet · About LEMON Manuals