Perimeter Lighting Feature
NOTE:
On vehicles with autolamps, the perimeter lighting feature does not activate in daylight conditions.
Vehicles equipped with perimeter lighting can have this feature activated or deactivated. Refer to PERIMETER LIGHTING FEATURE PROGRAMMING for programming information.
The headlamps, parklamps, and tail lamps illuminate when the unlock control on the IKT is pressed. The perimeter lighting feature will turn off the lamps if:
- the ignition switch is turned to the RUN position.
- the IKT lock control is pressed.
- the vehicle is locked using the keyless entry keypad (if equipped).
- 25 seconds have elapsed since the perimeter lighting was activated.